Service
Keeping you safe on the road.
At Eagers, quality, reliable vehicles is number 1 in importance. But, like anything mechanical, you have to maintain it to keep it functioning at its best. Even if your car isn't put to the test every day, it's important that "the basics" are checked and serviced regularly throughout your car's life. Changing the oil, checking your brakes and transmission fluid – it's all part of keeping you safe on the road.
PitStop Tyre Service
No longer do you have to have your vehicle serviced at the Dealership and your tyres serviced somewhere else. Now our Dealerships can provide a complete tyre service for your Holden, Ford, Toyota, Mazda, Mitsubishi, Kia (or other brand) vehicle through the Pitstop Tyre Service. Click here to learn more.
What to Expect from Eagers Holden servicing
- A friendly reception and prompt attention.
- A thorough consultative interview to ensure all your requirements are fully understood.
- Complete transparency. Once we have completed our diagnosis, we will advise you upfront what needs to be done, how long it will take, how much it will cost, and what your expectations should be.
- All prices will be clearly illustrated and explained.
- Should additional work be required, we will contact you in advance for approval.
- Assurance that the service will be performed to the highest standards every time.
- Only state-of-the-art Holden approved technical equipment will be used.
- A full report and explanation on work performed and costs involved, upon collecting your car.
Servicing your Holden at an Eagers Service Centre gives you total confidence that your maintenance or repair is carried out to Holden specifications and using approved parts.
Courtesy Bus:
Courtesy Bus departs Windsor 8am and 9am daily dropping off at Royal Brisbane Hospital, Fortitude Valley and Brisbane City. Pick up in the afternoon starting at 4pm from Brisbane City.
The Holden Difference
It's there to ensure that workshop practices provide a consistently high quality for all service and repair work. We are committed to making sure all Holden vehicles are correctly diagnosed, repaired and serviced, resulting in consistent "right first time" performance. It's a commitment we will always stand behind. Here are some of the ways the service you receive is different.
- Specialist Technicians
- Factory backup
- Latest Computerised Technology
- Holden Factory Approved Parts
- Two Year Parts Guarantee
- Six Months Labour Guarantee
- Two Year Parts guarantee
- Fair and Open Pricing Policy
Understandably, one of your concerns will be whether you're paying the right price for your servicing. That's why we're committed to a completely transparent consultative service process with strict guidelines for all Holden Dealers.
Keep your Holden Running at its best
Check air pressure weekly (including spare) to ensure safety, reduce fuel consumption and increase tyre life. Correct air pressures are shown on the tyre placard located in the driver's door. Do not attempt to drive on a flat tyre more than is necessary to safely stop. Driving even short distances may cause irreparable damage. Tyres should be replaced when:
- Cord or fabric is showing or tread indicators appear. Tread indicators appear as plain bars when only 1.5mm of tread remains.
- Tread or sidewall is cut, split or cracked and exposes fabric.
- Tyre has a bump or bulge in it.
- Tyre has a puncture which cannot be repaired because of size or location of damage.
The front and rear tyres wear out at different rates. Rotating your tyres will extend the life of your tyre tread and help avoid the problem of poor directional stability.
Levels should be checked weekly. Check level when the oil is warm, or when stopping for fuel. Use only specified, recommended grades of oil outlined in the handbook. Oil that is too thin (low viscosity) will increase its consumption, so stick to specified grades. The use of supplemented additives that are not specified in your handbook is not recommended as they will not only increase operating costs but also may be detrimental to the operation of your vehicle.
Check and top up washer fluid weekly. For best results, add the correct amount of Holden washer fluid, as specified in your handbook.
When fitted, air conditioning uses power from the vehicle's engine, so you will notice a small decrease in power and a slight increase in fuel consumption when it is in use. Switch air-conditioning on for 5-10 minutes once every two weeks (even in winter) to lubricate the air-conditioner system seals. A slight hissing sound may be heard for a short time when air is turned off - this is normal.
Spongy brake pedals, increased pedal travel, fluid leaks or components seizing may mean your brake fluid needs changing. Brake fluid deteriorates over time as it absorbs moisture from the air. Once contaminated it lowers the fluid's boiling point and corrodes internal brake system components. Changing fluid regularly avoids these problems and helps to flush contaminates out of the hydraulic system.
Coolant levels should be checked at least weekly. If required, top up coolant, mixing a solution of Holden coolant and clean fresh water as per the ratio specified in your handbook. Never mix incompatible coolants. In an emergency use plain water until the correct coolant is available. Do not top up coolant level beyond the maximum mark.
Book my service online
2 convenient locations
Newstead
Evelyn Street
Newstead, Brisbane QLD 4006
Hours of Operation
- 7.00am – 5.30pm Monday - Friday
Windsor
143 Newmarket Road,
Windsor, Brisbane QLD 4030
Hours of Operation
- 7.30am – 5.30pm Monday - Friday
- 8.30am – 11.30am Saturday (Windsor Only)
Current Inventory
as at 06 February 2012
Care + Maintenance
Research
Buying Tools
- Brochures
- Finance + Insurance
- Special Offers
- We Want to Buy Your Car
- No Obligation Enquiry
We will respond promptly